Ir al contenido principal

Entradas

Mostrando entradas de julio, 2008

Montar USB en Linux

Para instalar memoria USB en Linux se realiza de la siguiente forma How To Mount USB flash drive from Command Line Mounting a USB flash drive in GNOME (or another Linux desktop environment) is as easy as plug and play. Yet, occasionally, you need to mount one on a server which does not run X, then you must know how to do it on the command line. Become root.$ sudo -s Plug in USB drive to a USB port. Identify the correct partition name corresponding to the USB drive. For my Debian system, it is sda, and partition 1.$ dmesg grep -i 'SCSI device'... SCSI device sda: 3903488 512-byte hdwr sectors (1999 MB) Alternatively, $ grep SCSI /var/log/messages...Dec 1 11:52:26 tiger kernel: SCSI device sda: 3903488 512-byte hdwr sectors (1999 MB) Mount the partition to an existing mount point (directory). $ mkdir -p /mnt/myusb $ mount -t vfat -o rw,users /dev/sda1 /mnt/myusb users give non-root users the ability to unmount the drive. You can verify the drive is indeed mounted as follows: $ mo

Cambiar Password de Agente Groupwise Messensger Server

Para realizar cambio de password del Agente Groupwise Messenger se tomó el articulo de un sitio encontrado en Novell, el problema mostrado era que el cliente de Groupwise no encontraba el servidor por el puerto 8300 Changing the Agent User Password When the Messaging Agent and Archive Agent are installed, the user’s eDirectory password that is used to read the configuration that starts the agents is stored in the startup file for each agent. Prior to Messenger 2.0.2 Hot Patch 1, this password was stored in plain text. By default in Messenger 2.0.2 Hot Patch 1, the password is obfuscated to prevent the password from being read. If you want to check whether the password has been obfuscated, look in the startup files. The password is prepended with $$: if it has been obfuscated. The GWMPassword utility is used to change the password in the startup file for both the Messaging Agent and the Archive Agent. NOTE:Messsenger 2.0.2 Hot Patch 1 must be installed before you use the GWMPassword Ut

Instalación de Sistema Operativo Windows Desatendida

Cuando hay que realizar una instalación de un sistema operativo en Windows, se puede utilizar el software nlite, el cual puede lograr una instalación desatendida en la que se pueden integrar los controladores, poner el serial o elegir el fondo de entre otras muchas cosas que se pueden hacer. Para esto Microsoft ofrece una solución como lo es: el cual fue tomado del link http://support.microsoft.com/kb/254078/en-us How to add OEM Plug and Play drivers to Windows installations View products that this article applies to. Article ID : 254078 Last Review : March 1, 2007 Revision : 5.4 This article was previously published under Q254078 For a Microsoft Windows XP version of this article, see 314479 (http://support.microsoft.com/kb/314479/) . On This Page SUMMARY MORE INFORMATION For Microsoft Windows 2000 Unattended setup Sysprep setup RIS installations Riprep images Existing Windows installations For Windows Server 2003 Unattended setup Sysprep setup RIS installations Riprep images Exi

Problema con Btrieve on Netware --Contable

El servidor se quedaba cargando en el NILE.NLM al revisar los logs arrojaba el error BSPXCOM-20: An SpxOpenSocket() error (150) has occurred. Solution Details Solution ID: 00016737 BSPXCOM-20: An SpxOpenSocket() error (150) has occurred. Problem Description: Installed Pervasive.SQL V8.5 on NetWare 6.0 server. After rebooting the server, "BSPXCOM-20" and "BSPXCOM-18" errors are returned on the NetWare monitor. BSPXCOM-20: An SpxOpenSocket() error (150) has occurred. BSPXCOM-18: A thread initialization error has occured. Problem Environment: Pervasive.SQL V8.5 Novell NetWare 6.0 Cause of this problem: TCP/IP was available on the NetWare 6.0 server. The server was not configured for SPX. Solution Notes: To avoid these messages: Remove SPX protocol from our supported protocols. Find BTI.CFG file on the server''s SYS:\SYSTEM directory. Open it with Notepad. In "Btrieve Communications Manager" section, there is a line ''Supported Protocols=SP